0 0
Note: For the proper functioning of this online shop JavaScript is required!
Your search for: Quality tools, Clamping device returned 374 hits.
Drill chuck holder DIN 69871, form A - Made of alloyed case-hardening steel - Hardened 58 ±2 HRC, min. 0.5 mm deep - Tensile strength in the core after case-hardening approx. 980 N/mm² - Taper DIN 254 - Taper angle tolerance AT3 - Surface ...
Drill chuck holder JIS B (MAT-BT), form A - Made of alloyed case-hardening steel - Hardened 58 ±2 HRC, min. 0.5 mm deep - Tensile strength in the core after case-hardening approx. 980 N/mm² - Taper DIN 254 - Taper angle tolerance AT3 - Surface ...
CNC drill chuck DIN 69893 without coolant supply - Short design - For clockwise/anticlockwise rotation - Secured against loosening during anticlockwise rotation or rapid deceleration from higher speeds - Taper angle tolerance AT3 - Surface roughness ...
CNC precision short drill chuck for clockwise/anticlockwise rotation - Tool holder DIN 2080 - For clockwise/anticlockwise rotation - Significantly increased clamping force compared to conventional drill chucks - High clamping force due to gear ...
Short drill chuck DIN 2080 for clockwise and anticlockwise rotation - DIN 2080 form A - Made of alloyed case-hardening steel - Hardened 58 ± 2 HRC - Taper according to DIN 254 - Tensile strength in the core after case-hardening approx. 950 ...
NC drill chuck DIN 69871 - DIN 69871 Form A - Short design - For clockwise/anticlockwise rotation - Secured against loosening during anticlockwise rotation or rapid deceleration from higher speeds - Taper DIN 254 - Max. permissible speed 7000 ...
NC drill chuck DIN 2080 - Short design, holder DIN 2080 form A - For clockwise/anticlockwise rotation - Secured against loosening during anticlockwise rotation or rapid deceleration from higher speeds - Taper DIN 254 - Max. permissible speed 7000 ...
High-performance quick-action drill chuck SBF-plus - Self-clamping three-jaw drill chuck - Drill chuck and shank form a single unit - Optimum stability thanks to compact design - High concentricity (based on DIN ISO 10888) - For high speeds and ...
Quick-action drill chuck Supra SK - Right and left rotation - Clamping force safety device - Self-clamping during drilling - Sealed against drilling dust and dirt - For hand-held impact drills and drills up to 1300 watts
Extra RV drill chuck, cannulated - Radial locking - Collision protection - Keyless three-jaw drill chuck - Automatic readjustment - Right and left rotation - Polygon for assembly and disassembly - For mains and cordless drills up to max. 100 Nm ...
High-performance quick-action drill chuck NCBF - DIN ISO 239 - Keyless three-jaw drill chuck - Self-clamping - Clockwise and anticlockwise rotation - With clamping lock, prevents opening in the event of anticlockwise rotation or abrupt spindle ...
PRIMA 6L drill chuck - Hexagon mount - Right and left-hand rotation - Impact drill-proof - Drill chuck taper DIN 238 - For universal drilling work on electric hand drills, impact drills and stationary drills Delivery: With key.
Gear rim hammer drill chuck PRIMA HBF - Right and left rotation - SDS-plus mount - Clamping chamfers of the jaws made of carbide - For stationary and hand-held drills, especially for screwdrivers with SDS-plus mount
MK ejector, semi-automatic - Ejector for one-handed operation - For tool cones to DIN 228 - Special steel, hardened - Tempered in burnished shade - Powder-coated handle, red - With finger guard
Tapered arbor with Morse taper shank - Drill chuck taper to DIN 238 - Fully hardened and ground - Morse taper shank with ejector tabs
Parallel shank for drill chuck - Hardened, ground - For drill chucks with taper adapter
Fastening screw for top jaws, thread screw 2
External square-head wrench - Made of special steel - Shank and pivot pin hardened - Tempered in burnished tone - Pivot pin pressed in - DIN 904,905
Square socket wrench - Made of special steel - Shank and turning pin hardened - Tempered in black oxide - Turning pin pressed in - DIN 904,905
Short taper steel flange ISO 702-3 (DIN 55027) and DIN 55022, with stud bolt and collar nut - Finished on the machine side - Chuck side machined flat Delivery: steel flange with stud bolts, stud bolts or camlock bolts. - DIN 55027 and DIN 55022 - ...
Short taper steel flange DIN 55029 and ASA B 5.9 D 1, with stud bolt for Camlock - Finished on the machine side - Chuck side machined flat Delivery: Steel flange with stud bolts, stud bolt or Camlock bolt. - DIN 55029 and ASA B 5.9 D 1 - With stud ...
POSISTOP workpiece stop - For clamping short parts - Made of anodized aluminium, ground to a flat surface - With integrated NEODYM magnets for easy attachment - Can be extended to a jaw width of 55 mm by removing the lugs - Positioning accuracy ...
POSISTOP workpiece stop set - For clamping short parts - Made of anodized aluminium, ground to a flat surface - With integrated NEODYM magnets for easy attachment - Can be extended to a jaw width of 55 mm by removing the lugs - Positioning ...
Jaw unscrewing device for three-jaw chucks - For grinding out hardened and unscrewing unhardened jaws - Infinitely adjustable
Replacement jaw for lathe chuck, 3-part Unstepped block jaws - Unhardened - Material 16MnCr5
Replacement jaw for lathe chuck, 4-part Unstepped block jaws - Unhardened - Material 16MnCr5
Replacement jaw for lathe chuck, 4-part Inwardly stepped jaws (lathe jaws) - Hardened
Replacement jaw for three-jaw lathe chuck, 3-part Base jaws - With fastening screws
Spare base jaw with fastening screws, 3-piece, for wedge bar three-jaw lathe chuck DURO-T
Spare reversible top jaw, hardened, 3-part, for wedge bar three-jaw lathe chuck DURO-T
Spare top jaw, unstepped, unhardened, 3-piece, for wedge bar three-jaw lathe chuck DURO-T
Wedge bar three-jaw lathe chuck DURO-T with short taper DIN 55029, with stud bolt for Camlock - With jaw lock and quick jaw change system - Very high jaw change repeat accuracy - Concentricity and axial run-out tolerance twice as accurate as DIN ...
Edge finder, mechanical, cylindrical - Hardened and ground - Clamping shaft connected to probe head by spring - Probe accuracy 0.01 mm - Spindle speed approx. 600 min-1 - For aligning workpiece surfaces or edges
Moving center point no. 600 - Small body diameter - Point angle 60° - Body hardened and ground - Running tip made of wear-resistant tool steel - High concentricity - Shank ground true to gauge
Live center point with extended running tip No. 604 HVL - Short projection length - Point angle 60° - Low-vibration running - Running tip with shaft bearing - Body hardened and ground - The extended running tip reduces the permissible load and ...
Live center point Orange Line - Point angle 60° - Regrindable, through-hardened running tip - Body hardened and ground - Splash groove - Slim housing shape
Live center point, FORUM - Point angle 60° - Body and running tip hardened - For machining small and very small parts on larger lathes
Live center point no. 604 H - Point angle 60° - Body hardened and ground - Slim housing shape - Regrindable, through-hardened barrel point
Live center point PRO - Point angle 60° - Body hardened and ground - Triple bearing for high axial and radial loads - Lubricated for life
Button magnet - Material AlNiCo 500 - With split holding surface and through-hole for fastening - Operating temperature magnet up to 450 °C - For laboratory purposes, for measuring and positioning
Magnetic flat gripper with threaded bush - Made of hard ferrite - Surface galvanized, shielded - Recommended operating temperature 100 °C (max. operating temperature 200 °C) - For mounting in fixtures by screwing on
Neodymium magnet flat gripper with bore and 90° countersink - Neodymium magnet - up to 6 times higher holding force compared to conventional ferrite magnets - Steel housing, galvanized - Max. Max. operating temperature 80 °C