Cart

Corner milling cutter 90° with IK AP...1003 - Shell milling cutter - Positive approach angle to minimize cutting force - Universal application - With internal cooling - Suitable for MTC

90° corner milling cutter with IK AP...1003 - Screw-in milling cutter - Positive approach angle to minimize cutting force - Universal application - With internal cooling - Suitable for MTC

Milling indexable insert AP...1003 - Highly positive geometry - Precision sintered - Universal application - 90° approach - Production of high surface quality

Corner milling cutter 90° with IK, AP...1604 - Shell milling cutter - Positive approach angle to minimize cutting force - Universal application - With internal cooling - Suitable for MTC

Corner milling cutter set 90° with IK, AP...1604 - Shoulder milling cutter - Positive approach angle to minimize cutting force - Universal application - With internal cooling - Suitable for MTC Contents: 1 x Corner milling cutter 90° with IK, ...

Adjustable chamfer cutter 10-80°, TC...16T3, SC...1204 - End mill - Setting angle 10-80° - For deburring and chamfering - Countersinking can only be used in stable conditions - Smooth running thanks to stable construction - Infinitely ...

Screw

Face milling cutter 45° with IK, HN...0906 - Shell face milling cutter - Universally applicable - With internal cooling - Highly positive geometry - 12 insertable insert cutting edges

Milling indexable insert SE...1204 - Highly positive geometry to reduce cutting forces - Precision ground

Face milling cutter 45° MTC with IK, SE...1204 - Shell face milling cutter - Suitable for MTC machining - With internal cooling - Vibration inhibition due to unequal pitch - Positive geometry to reduce cutting forces

Slot milling cutter - long, HSS-Co8, type N, surface bright - Design: long - HSS-Co8 - Type N - 2 cutting edges - Factory standard - DIN 1835-B - Helix angle 30° - For milling keyways and feather keyways Ø e8 for fit P9 - Face, side and ...

Slot milling cutter - short, HSS-Co8, type N, bright surface - Version: short - HSS-Co8 - Type N - 3 cutting edges - DIN 327 - DIN 1835-B - helix angle 30° - For milling keyways and feather keyways Ø e8 for fit P9 or as a peripheral milling ...

Slot milling cutter - medium length, HSS-Co8, type N, bright surface - Version: long - HSS-Co8 - Type N - 3 cutting edges - Factory standard - DIN 1835-B - Helix angle 30° - For milling keyways and feather keyways Ø e8 for fit P9 or as a ...

Roughing end mill - short, HSS-Co10, type HR, 3-6 teeth, bright surface - Version: short - HSS-Co10 - Type HR - 3-4 cutting edges - DIN 844-K - DIN 1835-B - helix angle 30° - For peripheral and drill milling - With center cut - rake angle 13°

Roughing end mill - short, HSS-Co10, type HR, 3-6 teeth, surface TiAlN-coated - Version: short - HSS-Co10 - Type HR - 3-4 cutting edges - DIN 844-K - DIN 1835-B - helix angle 30° - For peripheral and drilling milling - With center cut - rake ...

Rough finishing end mill - short, HSS-Co5, type NF, bright surface - Version: short - HSS-Co5 - Type NF - 4 cutting edges - DIN 844-K - DIN 1835-B - Rough finishing cut - helix angle 30° - For peripheral and drilling milling - With center ...

Roughing end mill - short, HSS-Co5, type NR, 4 teeth, bright surface - Design: short - HSS-Co8 - Type NR - 4 cutting edges - DIN 844-K - DIN 1835-B - Roughing teeth - helix angle 30° - For peripheral and drilling milling - Face, side and ...

Roughing end mill - short, HSS-Co5, type NR, 4 teeth, TiAIN-coated surface - Version: short - HSS-Co8 - Type NR - 4 cutting edges - DIN 844-K - DIN 1835-B - Roughing teeth - Helix angle 30° - For peripheral and drilling milling - Face, side ...

Shell end mill, HSS-Co5, type NR, bright - HSS-Co5 - DIN 1880 - Profile relief grinding - Cylindrical bore with longitudinal and transverse flutes to DIN 138 - helix angle 25° - rake angle 14° - Suitable as face, corner and shell end mill - ...

Shell end mill, HSS-Co8, type HR, TiCN coating - HSS-Co8 - DIN 1880 - Roughing end mill with fine teeth, type HR - Cylindrical bore with longitudinal and transverse flutes to DIN 138 - Helix angle 25° - Rake angle 14° - Profile relief ground - ...

Solid carbide NC deburring cutter, 120° - Version: short - Solid carbide - Type UNI - 4 cutting edges - Factory standard - DIN 6535-HB - For deburring and chamfering edges - With center cut

Solid carbide NC deburring cutter, point angle 90° - Version: short - Solid carbide - Type UNI - 4 cutting edges - Factory standard - DIN 6535-HB - For deburring and chamfering edges - With center cut

Solid carbide NC deburring cutter, point angle 90°, TiAIN-coated - Version: short - Solid carbide - Type N - 4 cutting edges - Factory standard - DIN 6535-HB - For deburring and chamfering edges - Dry machining possible - With center cut

Solid carbide end mill, DIN 6527, type INOX, short, Z4, Carapace+, FORTIS - Version: short - Solid carbide UF - HPC - DIN 6527 - Type INOX - Helix angle 35/38° - 4 flutes - DIN 6535-HB - Dry machining possible - With center cut - Dynamic ...

Solid carbide end mill, DIN 6527, type INOX, long, Z4, radius, Carapace+, FORTIS - Version: long - Solid carbide UF - HPC - DIN 6527 - Type INOX - With neck relief - Helix angle 35/38° - 4 flutes - DIN 6535-HB - Dry machining possible - ...

Solid carbide end mill, short, shank HB, 3 flutes, TiAIN, 30° - Design: short - Solid carbide K10/K20 - Type N - 3 flutes - DIN 6527 - DIN 6535-HB - Helix angle 30° - Suitable for universal machining and slot milling - Very stable design, ...

Solid carbide end mill - short, 4 flutes, TiAIN-coated - Design: short - Solid carbide K10/K20 - Type N - 4 flutes - DIN 6527 - DIN 6535-HB - For peripheral milling, trimming, finishing, for universal use - Very stable design, milling depth ...

Solid carbide end mill - long, 4 flutes, AlTiN+-coated - Version: long - Solid carbide UF - Type N - 4 flutes - DIN 6527 - DIN 6535-HB - For peripheral milling, trimming, finishing - Helix angle 30° - With center cut

Solid carbide end mill, DIN 6527, type Steel, short, Z4, Carapace+, FORTIS - Version: short - Solid carbide UF - HPC - DIN 6527 - Type STEEL - helix angle 35/38° - 4 flutes - DIN 6535-HB - Dry machining possible - With center cut - Corner ...

Solid carbide end mill for aluminum - long, 2 flutes - Design: long - Solid carbide UF - Type W - 2 flutes - DIN 6527 - DIN 6535-HB - helix angle 45° - For milling keyways and feather keyways, trimming, finishing, for universal machining - ...

Solid carbide end mill, extra long - Design: extra long - Solid carbide K10/K20 - Type N - 2 cutting edges - Factory standard - DIN 6535-HA - Helix angle 30° - For milling keyways and feather keyways, for universal machining - Milling depth ...

Solid carbide end mill, extra long, 30°, blank - Version: extra long - Solid carbide K10/K20 - Type N - 3 cutting edges - Factory standard - DIN 6535-HA - helix angle 30° - For milling grooves - Milling depth max. 3 x D - With center cut

Solid carbide end mill, extra long, type N, to factory standard, 30°, 4 teeth - Design: extra long - Solid carbide UF - Type N - 4 cutting edges - Factory standard - DIN 6535-HA - Helix angle 30° - For peripheral milling, trimming, ...

Solid carbide end mill ecoSpeedcut-Universal, short, ALUNIT-S® - Design: short - Solid carbide - Type N - 4 cutting edges - DIN 6535-HA - Unequal helix pitch 35/38° - For milling grooves, roughing, finishing, for universal machining - High ...

Solid carbide mini milling cutter TiAlN, 3 flutes, extra short, 45° - Design: extra short - Solid carbide UF - Type NH - 3 flutes - Factory standard - DIN 6535-HB - For milling keyways and feather keyways, for universal machining - Helix angle ...

Solid carbide end mill - long, 6-8 cutting edges, AlTiN+-coated - Version: long - Solid carbide UF - Type N - 6-8 cutting edges - DIN 6527 - DIN 6535-HB - helix angle 45° - For peripheral milling, trimming, finishing - With center cut

Solid carbide end mill, long, 4 teeth, 30°, Twindur - Version: long - Solid carbide - Type N - 4 cutting edges - DIN 6527-L - DIN 6535-HB - For peripheral milling, trimming, finish milling, for universal machining - Dry machining possible - ...

Solid carbide roughing end mill for INOX machining, long - Design: long - Solid carbide UF - Type HR - 3-4 cutting edges - Factory standard - DIN 6535-HB - helix angle 20° - HSC machining up to 62 HRC - Dry machining possible - Particularly ...

Solid carbide roughing end mill - long, type HR, factory standard, solid carbide, TiAlN-coated surface, for INOX machining - Design: long - Solid carbide UF - Type HR - 3-6 cutting edges - Factory standard - DIN 6535-HB - helix angle 45° - ...

Bimetal band saw blade bi-alfa cobalt M42 - Bit metal band saw blade with highly flexible backing strip and tooth tips made of HSS-M42 - Tooth tip hardness 67-69 HRC - 15 m rolls in cassette - Particularly suitable for small and medium ...