Cart

Automatic drills (short drills) cylindrical shank, HSS C05, type GU 500 DZ - DIN 1897 - HSS - Profile ground - Core thickness normal - Shank (DIN) cylindrical - Type GU 500DZ - Helix angle 38° - Point angle 118° - Side rake angle greater ...

Automatic drills with cyl. Shank, HSS, type N, DIN 1897, profile ground, surface bright, FORUM - DIN 1897 - HSS - Profile ground - Core thickness normal - Shank (DIN) cylindrical - Type N - Helix angle 25-30° - Point angle 118° - Side rake ...

Sheet metal drill bit, extra short (body drill bit) - Similar to DIN 1897 - HSS - Type DK 77 - helix angle 25-30° - point angle 118° - side rake angle greater than normal - core thickness considerably greater than normal - core rise without ...

Precision sheet metal peel drill bit Surface HSS TiAlN-coated - Factory standard - HSS - Diameter in the flute laser-signed - Straight fluted - Slipping in the drill chuck is prevented by the 3-face shank Note : To increase the tool life, we ...

Properties: - shank cylindrical according to DIN 6535-HA - surface Fire - DIN 6537 - solid carbide UF - type RT 100 U - point angle 140° - side rake angle normal - core thickness greater than normal - core rise normal - special gash - special ...

Properties: - shank cylindrical according to DIN 6535-HE - surface Fire - DIN 6537 - solid carbide UF - type RT 100 U - point angle 140° - side rake angle normal - core thickness greater than normal - core rise normal - special gash-out - special ...

Through-hole tap - short, HSS-E - Metric ISO standard thread DIN 13 - DIN 352 - HSS-E - Type N - Form B with peel cut (4-5 threads) - Tolerance ISO 2 6H - Through-hole Advantage: Can be used as a hand or machine tap.

Tap extension - Square to DIN 10 and ISO - Fully hardened and galvanized (rust-protected, wear-resistant) - DIN 377 Note: For extending taps and other tools with a square shank.

Thread repair kit V-COIL Drilling : Drill out damaged threads with normal twist drills. Drilling is not necessary for spark plug threads; the combined drilling and tapping tool must be used here. Please note that larger holes are required for thread ...

Thread repair kit V-COIL Drilling : Drill out damaged threads with normal twist drills. Drilling is not necessary for spark plug threads; the combined drilling and tapping tool must be used here. Please note that larger holes are required for thread ...

Thread repair kit V-COIL Drilling : Drill out damaged threads with normal twist drills. Drilling is not required for spark plug threads; the combined drilling and tapping tool must be used here. Please note that larger holes are required for thread ...

Thread repair kit V-COIL Drilling : Drill out damaged threads with normal twist drills. Drilling is not necessary for spark plug threads; the combined drilling and tapping tool must be used here. Please note that larger holes are required for thread ...

Thread repair set, V-Coil rapid Delivery: In plastic case. Contents: 1 piece M5 x 0.8 tap, 1 piece 5.2 twist drill, 1 piece installation tool with hexagonal holder, 1 piece tang breaker, 1 piece universal holder and 10 pieces 1.5 x D thread ...

Thread repair set, V-Coil rapid Delivery: In plastic case. Contents: 1 piece M8 x 1.25 tap, 1 piece 8.3 twist drill, 1 piece installation tool with hexagonal holder, 1 piece tang breaker, 1 piece universal holder and 10 pieces 1.5 x D thread ...

Thread repair kit, V-Coil rapid Delivery: In plastic case. Contents: 1 piece M12 x 1.75 tap, 1 piece 12.4 twist drill, 1 piece installation tool with hexagonal holder, 1 piece tang breaker, 1 piece universal holder and 10 pieces 1.5 x D thread ...

Tap extractor set in cassette, 3-slot Delivery: In plastic cassette.

Threaded insert standard, free-running, stainless steel, 1.0 D

Threaded insert standard, free-running, stainless steel, 2.0 D

Hand tap set for metric fine thread, 2-piece - MF - HSS - Type N - DIN 2181 - ISO 2 6H - Through hole and blind hole Delivery: 2-piece set, consisting of rough and finish tap. Note: For metric ISO fine pitch thread DIN 13.

Hand tap set for metric thread, HSS-E, 3-piece - M - HSSE - Type VA - DIN 352 - ISO 2 6H - Through hole and blind hole Delivery: 3-piece set, consisting of rough, medium and finish tap. Note: For metric ISO standard thread DIN 13.

Ejector pin for core drill

Core drill - Carbide - QuickIN MAX/Weldon-32 chuck - The core drill only cuts a thin ring of material - The drill core is ejected by spring force via a guide and ejector pin - The chips are quickly discharged upwards and the risk of breakage is ...

Core drill set in plastic case - HSS Co - With Weldon shank Ø 19 mm - The core drill only cuts a thin ring of material - The drill core is ejected by spring force via a guide and ejector pin - The chips are quickly discharged upwards and the ...

Core drill bit set in plastic case - HSS Co - With Weldon shank Ø 19 mm - The core drill only cuts a thin ring of material - The drill core is ejected by spring force via a guide and ejector pin - The chips are quickly discharged upwards and the ...

Core drill HSS-Co RQX-coated, 30 mm cutting depth - HSS/HSS Co5 - With Weldon shank Ø 19 mm, 2 driving surfaces, 1 countersink Rota-Quick® - The core drill only cuts a thin ring of material - The drill core is ejected by spring force via a guide ...

Core drill HSS, surface bright, 50 mm cutting depth - HSS/HSS Co5 - With Weldon shank Ø 19 mm, 2 driving surfaces, 1 countersink Rota-Quick® - The core drill only cuts a thin ring of material - The drill core is ejected by spring force via a ...

Core drill HSS-Co RQX-coated, 50 mm cutting depth - HSS/HSS Co5 - With Weldon shank Ø 19 mm, 2 driving surfaces, 1 countersink Rota-Quick® - The core drill only cuts a thin ring of material - The drill core is ejected by spring force via a guide ...

Accessories for core drills - Adapter for use with all core drills with Weldon shank on FEIN Quick-IN quick-change system Delivery: Adapter complete with ejector pin + hexagon wrench

Holder for core drill Note: Turn ring clockwise and hold - insert core drill into holder - release ring - locks automatically. Can be used for core drills type 42 15513.../42 15515.../42 15512.../42 155 514... - Holder for core drills - Tool holder ...

Ejector pin for core drill - Guide pin for core drill

Replacement blades for circle cutters, type 00 and 00a, carbide Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut ...

Replacement blades for circle cutters, type 00 and 00a, carbide Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut ...

Replacement blades for circle cutters, type 00 and 00a, HSS-E-TiN Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to ...

Replacement blades for circle cutters, type 00 and 00a, HSSE Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut ...

Replacement blades for circle cutters, type 00 and 00a, HSSE Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut ...

Replacement blades for circle cutters, type 00 and 00a, HSSE Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut ...

Replacement blade for circle cutter type Liliput, HM Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut sheet metal ...

Replacement blade for circle cutter type Liliput, HSSE-TiN Circle cutter system Marchner For precise cutting of holes or slices from metals, plastics, etc., draw cut for metalworking using angled blades. GFS circular cutters can be used to cut sheet ...

TCT hole saw, MBS - Optimum cutting results thanks to special axial and radial grinding - Can be resharpened several times - Tapered centring drill bit Delivery: Including centring drill bit . MBS - With an ejector spring - Material thickness max. ...

MK holder for carbide-tipped hole saws - Holder with HSS center drill - Ø 8 x 80 mm - Recommendation: From Ø 37 mm, use Morse taper holder MK2 or MK3

Through-hole machine tap, 2 x D through hole, TiN-coated surface - ISO metric thread DIN 13 - DIN 376 - HSS-E - Form B with peel cut (3.5-5 threads) - Straight fluted - Tolerance ISO 2 6H - 2 x D through hole

Blind hole machine tap, surface steam-treated - ISO metric thread DIN 13 - DIN 371 - HSS-E - Form C (2-3 threads) - Right-hand helix 40° - Tolerance ISO 2 6H - 2 x D blind hole