0 0
Note: For the proper functioning of this online shop JavaScript is required!
Your search for: Welding & soldering technology, Tools returned 167 hits.
2-Ear Hose Clamp, Steel, Galvanized
Gas lighter and flintPiezo gas lighter
Hose connection pipe - Made of brass, according to DIN 8542
Swivel coupling - Prevents twisting of the gas hose during work - Optimal complement for all hand torch handles with a hose connection G 3/8 LH-KN - G 3/8 LH-ÜM x G 3/8 LH-KN, 58° version
Medium pressure regulator PS 16 bar (01 593) - For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance - Hose rupture protection EFV ( SBS ) with manual opening, shuts off the gas supply in case of hose ...
- Extremely lightweight, transformerless model with nickel-plated, chisel-shaped LF-ERSADUR permanent soldering tip 3.2 mm - The internally heated tip, in conjunction with the PTC heating element, ensures outstanding efficiency with minimal energy ...
Medium pressure hose line, rubber, PS 10 bar - For connecting fittings, consumer devices and pipelines - Hose line made of rubber with textile insert - Design 6.3 x 3.5 mm, cold-resistant to -30 °C - With union nut type M and cutting ring type D - ...
Low pressure regulator type EN61 PS 16 bar - For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance - Conformity: EC type examination according to DGR - Low pressure regulator type EN61 KLF x G 1/4" ...
Low pressure regulator type EN61 PS 16 bar - For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance - With safety relief valve PRV - Vent plug, which at the same time prevents moisture, e.g. rainwater, ...
Low pressure regulator Type EN61-DS PS 16 bar For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance Advantages and features: - Overpressure safety device ÜDS to protect the consumer appliances from ...
Brazing powder HKM No. 3.5611 E - According to DIN 8511, type F-SH 2 - For copper and brass welding as well as brazing on steel, copper and bund metals - 800-1100 °C Delivery: 50 g can.Signal word: DangerHazard statements:H222: Extremely flammable ...
Brass welding and brazing rods No. 3.5603 - For welding brass and brazing copper, nickel, iron and steel - Melting temperature 900 °C Delivery: 8 rods in self-service packaging.Signal word: WarningHazard statements:H361fd: Suspected of damaging ...
Soldering torch Crème Brulèe No. 035126E - Universally applicable and easy to handle for kitchen and hobby use - Large gas tank for long operating time - Comfort nozzle for easy refilling, working temperature 450 °C Delivery: soldering torch with ...
Hobbyist solder No. 940013 SB - For all soldering work except electrical engineering, electronics and electrical installation - S-Pb60Sn40 Delivery: Wrap of 1 m in 1.5 mm Ø, in SB carton.Signal word: DangerHazard statements:H360FD: May impair ...
Fittings solder 97 No. 428190- Solid - For soldering in cold and hot water installations, on heating systems up to 110 °C - For foodstuffs, refrigeration and air-conditioning technology, heating oil lines - DVGW GW 2 according to EN 29453, ISO 9453: ...
Leak detection spray Diprol BX No. 153039 - CFC-free, liquid - With corrosion protection for leak tests in pipeline and apparatus construction - ADR Kl. 2 Ziff. 5 A UN 1950 Delivery: 400 ml spray can. Note: Contains aerosol, irritant.Signal word: ...
Soldering grease No. 940059 SB - For all soldering work except electrical engineering, electronics and electrical installation - Can of 20 g Delivery: 20 g can in SB carton. Note: Contains zinc chloride, irritant.Signal word: DangerHazard ...
Soldering fluid No. 940061 SB - For all soldering work except electrical engineering, electronics and electrical installation Delivery: 30 ml bottle in SB carton. Note: Contains zinc chloride, irritant.Signal word: DangerHazard statements:H314: ...
Radiolot No. 508570 - Solder wire type HS10 2510, with activated resin flux - Non-corrosive on non-ferrous metals, fast flowing - ISO 9453: 2006 S-Pb60Sn40 IEC 61190-1-3 ROM1 / 1.1.2.B - With 2.5 % flux content - For soldering in electrical ...
Radiolot No. 940037 SB - For all soldering work in electrical engineering and electronics, S-Pb60Sn40 Delivery: Wrap of 1 m in 1.5 mm Ø, in SB carton.Signal word: DangerHazard statements:H360FD: May impair fertility. May cause harm to the unborn ...
Salmiak soldering stone No. 940097 SB - For cleaning soldering tips - 65 x 45 x 20 mm Delivery: In SB box.Signal word: CautionHazard statements:H302: Harmful if swallowed;H319: Causes severe eye irritation;H302: Harmful if swallowed
Gas soldering set INDEPENDENT 75 - Versatile gas soldering set - In a practical plastic case - The ergonomic gas soldering iron allows soldering anywhere and at any time - With its continuously adjustable power of 15 to 75 W (compared to electric ...
Valve cartridge CG 1750 No. 202093 - For T-line blowtorches - Powerful mixture of 70% butane and 30% propane - Size approx: Ø 6.8 x 16.2 cm - With 7/16" x 28 UNEF thread (Euro screw thread EN 417) - Contents 175 g - Weight: 280 g Suitable for: - TH ...
Valve cartridge CG 3500 No. 202095 - For T-line blowtorches - Powerful mixture of 70% butane and 30% propane - Size approx.: Ø 7 x 26 cm - With 7/16" x 28 UNEF thread (Euro screw thread EN 417) - Contents: 350 g - Weight: 520 g Suitable for: - ...
Screw valve cartridge CV 300 Plus No. 203428 - Cartridge with powerful butane/propane gas mixture in the ratio 80/20 - The safety valve allows the operation of Campingaz® appliances with the traditional Campingaz®, the Easy Clic® as well as the ...
PROMATIC shrink torch - For shrinking shrink tubing on cables, pipes and wires - Soft, powerful flame with yellow tint, easily visible even in daylight - Optimum working pressure is 2 bar
Smallest bottle 425 g (09 702) For supplying soldering equipment. Advantages and features: - Gas cylinder valve with safety relief valve and hook - Welded, with painted surface Approval : - EC type approval according to ROD Technical data : - Outlet: ...
Copper piece, solid (09 709) - For soldering iron - Copper piece solid, cranked, 350 g
Filling nozzle (09 707-01) - For filling very small cylinders - Combination connection for optional connection to 5, 11 or 33 kg gas cylinders - Filling nozzle with hexagon union nut G 3/8" LH-ÜM
High pressure hose line, rubber, PS 30 bar - For connecting fittings, consumer appliances and pipelines - High pressure rubber hose line - G 3/8" LH-ÜM x G 3/8" LH-ÜM, connections: Union nut x Union nut Conformity : - DVGW-tested Technical data : ...
Medium pressure regulator with leakage gas safety device type MD-LGS and accessoriesAccessories for connection M 22 x 1,5 LH DN 4 Double hose line M22 x 1,5 LH-ÜM x M22 x 1,5 LH-ÜM, length 5000 mm
Medium pressure regulator with leakage gas safety device type MD-LGS and accessoriesFor connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance. Advantages and equipment - With 30° outlet - Manometer for ...
Grinding head for "Turbo-Sharp X "Replacement grinding head for grinding unit Turbo-Sharp X. Without picture.
Welding pads - Split leather - Short-term loadable up to approx. 250 °C
Welding shield - Cotton, impregnated - Flame retardant - Shields manufactured according to DIN 4102B1 - Tube-Ø 38 mmwithout illustration
Splash protection blanket JT 650 G1 - With Alufix coating on one side - Very good flexibility and mechanical strength - Toxicologically safe and asbestos-free - Suitable for welding, soldering and flex splashes - Short-term loadable up to 600 °C, ...
Splash protection blanket JT 900 HT - High-temperature coated on both sides - Toxicologically safe and asbestos-free - Mechanically loadable - Suitable as splash protection blanket for welding beads in solid state - Short-term loadable up to 1150 ...
Welding glove No. 10-2750, yellow Approval/Standard: EN 388, EN 407, EN 12477 (09.2005) Type A/B, electrostatically tested according to EN 1149-2 Design : - Made of thick and flexible cowhide - Grain side on palm, split leather side on outside - ...
Torch cap - Torch cap medium - Accessories for TIG welding torches F-W 17/26/18
Clamping sleeve SR 17/26 Accessories for TIG welding torch SR 17/26
Aluminum welding wire AIMg 4,5 Mn Standard designation EN ISO 18273: S Al 5183 (AI Mg 4,5 Mn) Properties: - Welding rods and wire electrodes for TIG and MIG welding of AIMg alloys - Weld metal is seawater resistant - Thoroughly clean workpiece ...
Gas shielded welding wire THERMANIT A Si Standard designation EN ISO 14343-A AWS A 5.9 Mat.No. G 19 12 3 Nb Si ER318 (mod.) 1.4576 Properties : - Stainless, IC resistant - Corrosion resistant as like type stabilized CrNiMo steels - Joints and ...